HP 5120 SI Series

18
To do… Use the command… Remarks
Set the minimum
password length
password-control length length
Optional
By default, the setting for the user
group is used. If there is no such
setting for the user group, the
global setting is used.
Configure the
password
composition
policy
password-control composition
type-number type-number
[ type-length type-length ]
Optional
By default, the setting for the user
group is used. If there is no such
setting for the user group, the
global setting is used.
Specify the service types for the local
user
In non-FIPS mode:
service-type { ftp | lan-access |
{ ssh | telnet | terminal } * |
portal | web }
In FIPS mode:
service-type { lan-access | { ssh
| terminal } * | portal | web }
Required
By default, no service is
authorized to a local user.
Configure the binding attributes for the
local user
bind-attribute { ip ip-address |
location port slot-number
subslot-number port-number |
mac mac-address | vlan vlan-id }
*
Optional
By default, no binding attribute is
configured for a local user.
Configure the authorization attributes
for the local user
authorization-attribute { acl
acl-number | idle-cut minute |
level level | user-profile
profile-name | user-role
security-audit | vlan vlan-id |
work-directory directory-name }
*
Optional
By default, no authorization
attribute is configured for a local
user.
For LAN and portal users, only
acl, idle-cut, user-profile, and
vlan are supported.
For SSH and terminal users, only
level is supported.
For FTP users, only level and
work-directory are supported.
For Telnet users, only level and
user-role is supported.
For other types of local users, no
binding attribute is supported.
Set the expiration time of the local user expiration-date time
Optional
Not set by default.
Assign the local user to a user group group group-name
Optional
By default, a local user belongs to
the default user group system.