I
-
I
-
Error Messages
SCPI Error Messages
-144
-
148
-150
-151
-158
-160
-161
-168
“Block data not allowed”
“Character data too long”
The character data element contains more than twelve characters.
(See IEEE 488.2, 7.7.1.4).
“Character data not allowed”
A legal character data element was encountered where prohibited
by the device.
“String data error”
This error, as well as errors -151 through -159, are generated
when parsing a string data element. This particular error message
should be used if the device cannot detect a more specilic error.
“Invalid string data”
A string data element was expected, but was invalid for some
reason. (See IEEE 488.2, 7.7.5.2); for example, an END message
was received before the terminal quote character.
“String data not allowed”
A string data element was encountered but was not allowed by the
device at this point in parsing.
“Block data error”
This error, as well as errors -161 through -169, are generated
when parsing a block data element. This particular error message
should be used if the device cannot detect a more specific error.
“Invalid block data”
A block data element was expected, but was invalid for some
reason. (See IEEE 488.2, 7.7.6.2); for example, an END message
was received before the length was satisfied.
A legal block data element was encountered but was not allowed
by the device at this point in parsing.
16-11
To Next Page
Loading...
General