HP 86140A Series

Index
Index-1
A
absolute accuracy, 7-3
ac line-power cords, 6-4
accessories, 6-2
connecting, 1-5
static-safe, 6-7
accuracy
absolute/differential, 7-3
amplitude, 3-2
active
area, moving, 3-47
function area assist, 3-44
marker, automatic measurement, 3-54
marker, setting, 3-23
trace, setting, 3-23, 3-57
Active Marker.... softkey, 3-23, 3-26–3-27
Active Trace.... softkey, 3-23, 3-57
adapters, fiber-optic, 6-6
ADC trigger softkeys, 3-19
adding parameters in commands, 4-8
address.
See
HP-IB address
Adv Service Functions.... softkey, 3-50
Advanced Line Mkr Functions.... softkey, 3-29
alignment
automatic, 2-3, 2-20, 3-2–3-3
multi-point, 3-52
All Math Off softkey, 3-59
amplitude
accuracy, 3-2
calibration.
See
power calibration
units, setting, 3-12
vertical scale, 3-9
Amplitude functions
amplitude settings, 3-11
display mode, 3-10
peak to reference level, 3-11
reference level, 3-9
sensitivity, 3-10
vertical amplitude scale, 3-9
Amplitude menu, 2-12, 3-8
Amplitude Setup... softkey, 3-11
Appl’s key, 2-3
Applications menu, 2-10, 2-13
applications, accessing, 2-3
auto
chop mode, setting, 3-13
ranging, setting, 3-12
zero, setting, 3-12
Auto Align key, 2-3, 2-21, 3-3
Auto Meas key, 2-3, 2-21, 3-4
Auto Measure Setup.... softkey, 3-53
automatic
alignment, 2-3, 2-20, 3-2–3-3
measurement, 3-4, 3-53
automeasure, defaults, 3-53
Averaging.... softkey, 3-60
B
backup internal memory, 3-39
Backup/Restore Menu.... softkey, 3-39
bandwidth marker, 2-22
interpolation, setting, 3-32
units, setting, 3-31
Bandwidth not found message, 3-24
Bandwidth/Sweep functions
ADC trigger, 3-19
external trigger, 3-19
gated trigger, 3-18
internal trigger, 3-18
repeat sweep, 3-17
resolution bandwidth, 3-15
single sweep, 3-17
sweep time, 3-16
synchronous output, 3-20
trigger delay, 3-20
video bandwidth, 3-15
Bandwidth/Sweep menu, 2-14, 3-14
C
CALCulate subsystem commands, 4-45
calibration, 3-45
amplitude
See
calibration, power
cycle , 7-2
date, viewing, 3-13
power, 3-13, 3-44–3-45
wavelength, 3-45–3-46, 3-63
CALibration subsystem commands, 4-68
Calibration.... softkey, 3-44
care of fiber optics, iii, 1-9
case sensitivity in commands, 4-7
catalog file, selecting, 3-37
center wavelength, 3-62
with markers, 3-24
book.book Page 1 Monday, January 31, 2000 10:34 AM