General Information Model 8904A
1-10.
RECOMMENDED TEST EQUIPMENT
Table
2-1
lists the
test
equipment required for performance testing, adjusting, and servicing the
Multifunction Synthesizer. The Critical Specifications column describes the essential requirements
for each piece of test equipment. Other equipment can be substituted if it meets
or
exceeds these
critical specifications.
1-1
1.
DOCUMENTATION UPDATING
Serial Numbers
Attached to the instrument
is
a serial number plate. The serial number is in the form 1234A00123.
The
first
four digits and the letter are the serial prefix. The last five digits form the sequential suffix
that is unique to each instrument. The contents of these manuals apply directly to instruments having
the same serial number prefix(es) as listed under SERIAL NUMBERS on the respective manual
title pages.
For
information concerning
a
serial number prefix not listed on the title page
or
in the Manual Update
packets, contact your nearest Hewlett-Packard office.
An instrument manufactured after the printing of these manuals may have a serial number prefix
that is not listed
on
the manual title page. Having
a
serial number prefix that
is
greater than that
shown on the title page indicates that the instrument
is
slightly different from those documented in
the manual. In this case, your manual is provided with updating information to make
it
as
current
as
possible. This updating information includes any hardware or software changes that have occurred as
well as corrections to the documentation.
A
Description
of
the Manual Update Packet
A
Manual
Update
packet consists of replacement and addition pages which should be incorporated in
your manual
to
bring it up to date.
Signing Up for the Documentation Update Service
Hewlett-Packard offers
a
Documentation Update Service that will provide you with further updates
and changes as they become available. If you have not received update information that matches the
serial number of your instrument, you can receive this information through the Update Service.
If
you operate or service instruments with different serial prefixes, we strongly recommend that you
join this service immediately to ensure that your manual is kept current.
For
more information, refer
to the Documentation Update Service reply card included in this manual or contact:
Hewlett-Packard Company
Learning Products Department
24001 E. Mission-TAF C-34
Spokane, WA
99220
(509) 921-4001
Also, if you join the update service, you can indicate whether you choose to be contacted in the future
about the quality of the documentation you receive. We are trying to improve the documentation we
provide and periodically survey customers as to their expectations of the manuals.
1-10
rev.OlNOV89
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
