52
Figure 16 Add an access device
# Add a charging policy. See Figure 17.
Click the Service tab, and select Accounting Manager > Charging Plans from the navigation tree to enter
the charging policy configuration page. Then, click Add to enter the Add Charging Plan page, and
perform the following configurations:
a. Add a plan named UserAcct.
b. Select Flat rate as the charging template.
c. In the Basic Plan Settings field, set the fixed fee to be charged as 120 dollars per month.
d. In the Service Usage Limit field, set the Usage Threshold to 120 hours, allowing the user to
access the Internet for up to 120 hours per month.
e. Adopt the default settings for other parameters, and click OK to finish the operation.
Figure 17 Add a charging policy
# Add a service. See Figure 18.
To Next Page
Loading...
