7122
Unable to copy all files
Cause. File errors caused some files to be skipped in the BACKCOPY operation.
Effect. Files are missing on the destination tape.
Recovery. Reissue the command to see if the file errors are transitory.
7123
File exists on disk and is not being replaced
Cause. The RESTORE KEEP option is in use.
Effect. Tape files with names identical to files on the destination disk are not restored.
Recovery. Informational message only; no corrective action is needed.
7124
Secondary partition contains illegal file attributes
Cause. Secondary partitions cannot be backed up because of an invalid file attribute.
Effect. The entire partitioned file is skipped.
Recovery. Informational message only; no corrective action is needed.
7125
File not contained on tape due to partial backup
Cause. The BACKUP PARTIAL option is in use.
Effect. Files that have not been modified since the date specified with the PARTIAL option are not
backed up.
Recovery. Informational message only; no corrective action is needed.
7126
REBUILD was not specified and the tape was recorded using the
PARTIAL parameter
Cause. The RESTORE REBUILD option was not used to restore a tape created with the BACKUP
PARTIAL option.
Effect. Tape not restored.
Recovery. Reissue the command with the REBUILD option.
7127
PARTONLY option specified is incompatible
Cause. The PARTONLY option was used with incompatible options.
7122 201
To Next Page
Loading...
Need help?
General