LEDs, Switches, and Jumpers
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide E-7
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: j-appe LEDs, Switches, and Jumpers.doc
Codename: Ertl Part Number: 293974-001 Last Saved On: 10/11/02 11:23 AM
Table E-4: System Maintenance Switch (SW2) Settings
Position Function Default Description
S1 iLO service override Off Off = No function
On = Override iLO security enabled
S2 Configuration lock Off Off = System configuration can be
changed
On = System configuration is locked
S3 Reserved Off Reserved
S4 Floppy disable Off Off = Disable floppy boot
On = Override RBSU setting and
enable floppy boot
S5 Password override Off Off = Honor RBSU password setting
On = Override RBSU setting and
override password prompts
S6 Reset configuration Off Off = No function
On = ROM reads system configuration
as invalid, reset configuration
S7 Reserved Off Reserved
S8 Reserved Off Reserved
NOTE: “On” activates the function.
To Next Page
Loading...
