Installing Hardware Options
2-10 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: c-ch2 Installing Hardware Options.doc
Codename: Ertl Part Number: 293974-001 Last Saved On: 10/16/02 1:34 PM
3. Loosen the PCI riser board thumbscrew (1).
4. Lift the front of the assembly slightly (2) and then pull it out of the server chassis
PCI support slot (3).
Figure 2-5: Removing the PCI riser board assembly and
expansion board from PCI expansion board slot 1
5. Remove expansion board from PCI riser board assembly.
To Next Page
Loading...
