HP DL360 Maintenance And Service Guide

LEDs, Switches, and Jumpers
Rear Panel LED Indicators
The server rear panel contains five LEDs: one for the rear unit identification LED switch, two
for the iLO connector, and two for the RJ-45 connectors. Use the following figure and table
to identify each LED.
Figure 5-2: Identifying the rear panel LED indicators
Table 5-2: Rear Panel LED Indicators
Item LED Status
1 iLO link On = Link
Off = No Link
2 iLO activity Off = No Activity
Blinking = Activity
3 10/100/1000
NIC 1
Green = Network link
Blinking = Network link and activity
Off = No link to the network
4 10/100/1000
NIC 2
Green = Network link
Blinking = Network link and activity
Off = No link to the network
5 Rear Unit
Identification
LED switch
Blue = Activated
Blinking = System remotely managed
Off = Deactivated
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide 5-3

HP DL360 Specifications

General

Processor Sockets	2
CPU	Intel Xeon Scalable
Memory	Up to 3TB DDR4
Form Factor	1U Rack
Power Supply	Redundant Power Supplies, various wattage options
Network Controller	Embedded 1Gb or 10Gb Ethernet
RAID Support	Smart Array RAID
Operating System Support	Windows Server, Linux, VMware
Storage	Up to 10 SFF SAS/SATA/NVMe drives or 4 LFF SAS/SATA drives