HP DW017B - StorageWorks Ultrium 448 Tape Drive - SAS Cable Routing; Securing the Blanking Plate

SAS Cable
1. Replacement SAS cable 3. Connect replacement SAS cable to disk bays
2. Connect replacement SAS cable to host SAS HBA
Figure 24 SAS cable routing
7. Make sure the blanking plate is secure on the rear panel and replace the cover on the server.
Figure 25 Securing the blanking plate
IMPORTANT:
On some servers, even those with latch-mounted arrangements, it is necessary to use the
supplied screw to secure the blanking plate.
Ultrium half-height SAS Tape Drives
45