EasyManuals Logo

HP EliteOne 800 G3 User Manual

HP EliteOne 800 G3
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
Solving media card reader problems
Media card will not work in a digital camera after formatting it in Windows.
Cause Solution
By default, Windows will format any media card with a capacity
greater than 32MB with the FAT32 format. Some digital cameras
use the FAT (FAT16 & FAT12) format and can not operate with a
FAT32 formatted card.
Either format the media card in the digital camera or select FAT
le system to format the media card in a computer with Windows.
A write-protected or locked error occurs when attempting to write to the media card.
Cause Solution
Media card is locked. Locking the media card is a safety feature
that prevents writing to and deleting from an SD/Memory
Stick/PRO card.
If using an SD card, make sure that the lock tab located on the
right of the SD card is not in the locked position. If using a Memory
Stick/PRO card, make sure that the lock tab located on the bottom
of the Memory Stick/PRO card is not in the locked position.
Can not write to the media card.
Cause Solution
The media card is a read-only memory (ROM) card. Check the manufacturer’s documentation included with your card
to see if it writable. Refer to the previous section for a list of
compatible cards.
Media card is locked. Locking the media card is a safety feature
that prevents writing to and deleting from an SD/Memory
Stick/PRO card.
If using an SD card, make sure that the lock tab located on the
right of the SD card is not in the locked position. If using a Memory
Stick/PRO card, make sure that the lock tab located on the bottom
of the Memory Stick/PRO card is not in the locked position.
Unable to access data on the media card after inserting it into a slot.
Cause Solution
The media card is not inserted properly, is inserted in the wrong
slot, or is not supported.
Ensure that the card is inserted properly with the gold contact on
the correct side. The green LED will light if inserted properly.
Do not know how to remove a media card correctly.
Cause Solution
The computer’s software is used to safely eject the card. In Windows 7, click Start, select Computer, right-click on the
corresponding drive icon, and then select Eject. Pull the card out
of the slot.
In Windows 10, type file in the taskbar search box, and then
select File Explorer from the list of applications. In the left
column, expand This PC, right-click on the corresponding drive
icon, and then select Eject. Pull the card out of the slot.
NOTE: Never remove the card when the green LED is ashing
Solving media card reader problems 85

Table of Contents

Other manuals for HP EliteOne 800 G3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP EliteOne 800 G3 and is the answer not in the manual?

HP EliteOne 800 G3 Specifications

General IconGeneral
Tcase71 °C
Bus typeDMI3
SteppingR0
Processor codeSR2BX
Processor cache6 MB
Processor cores4
Processor modeli5-6500
System bus rate8 GT/s
Processor familyIntel® Core™ i5
Processor seriesIntel Core i5-6500 Desktop series
Processor socketLGA 1151 (Socket H4)
Processor codenameSkylake
Processor frequency3.2 GHz
Processor cache typeSmart Cache
Processor lithography14 nm
Processor manufacturerIntel
Conflict-Free processorYes
Processor front side bus- MHz
PCI Express slots version3.0
Processor boost frequency3.6 GHz
Processor operating modes64-bit
PCI Express configurations1x16, 2x8, 1x8+2x4
Thermal Design Power (TDP)65 W
Maximum number of PCI Express lanes16
Memory types supported by processorDDR3L-SDRAM, DDR4-SDRAM
Memory voltage supported by processor1.35 V
Memory clock speeds supported by processor2133, 1333, 1600, 1866 MHz
Memory bandwidth supported by processor (max)34.1 GB/s
Maximum internal memory supported by processor64 GB
Discrete graphics cardNo
On-board graphics card ID1912
Discrete graphics card modelNot available
On-board graphics card modelIntel® HD Graphics 530
Maximum on-board graphics card memory1.74 GB
On-board graphics card OpenGL version4.4
On-board graphics card base frequency350 MHz
On-board graphics card DirectX version12.0
On-board graphics card dynamic frequency (max)1050 MHz
Number of displays supported (on-board graphics)3
Color gamut72 %
RGB color spaceNTSC
Display diagonal23.8 \
Native aspect ratio16:9
Product typeAll-in-One PC
Motherboard chipsetIntel® Q270
Memory slots2
Internal memory8 GB
Memory slots typeSO-DIMM
Memory clock speed2400 MHz
Internal memory typeDDR4-SDRAM
Maximum internal memory32 GB
Memory layout (slots x size)1 x 8 GB
SSD capacity256 GB
SSD interfacePCI Express
Storage mediaSSD
Optical drive typeDVD-RW
Card reader integrated-
Number of storage drives installed1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity6
USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity0
Product colorBlack, Silver
Country of originChina
Antenna type2x2
Wi-Fi standardsWi-Fi 5 (802.11ac)
Ethernet LAN data rates10, 100, 1000 Mbit/s
AC adapter power180 W
Recovery operating systemWindows 10 Pro
Operating system installedWindows 7 Professional
Scalability1S
Processor ARK ID88184
Processor package size37.5 x 37.5 mm
Supported instruction setsSSE4.2, AVX 2.0, SSE4.1
Thermal solution specificationPCG 2015C
Intel Identity Protection Technology version1.00
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)53.8 mm
Width (with stand)539.6 mm
Height (with stand)314.8 mm
Weight (with stand)6030 g

Related product manuals