4. Pull the port cover (3) toward the bottom and o the computer.
Stands
Two stands are available for the computer:
●
Recline stand
●
Adjustable height stand
Recline stand
To remove the stand:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 23).
2. Remove the rear port cover, if it is installed. For instructions, see Removing the rear port cover
on page 23.
3. Press the release latch under the stand (1).
4. Lift the stand up (2), and then pull the stand hooks out of the computer (3).
24 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
