Table 5-3 Computer Setup—Advanced (for advanced users) (continued)
Option Heading
This feature is designed to provide a visual indication of what sleep state the system is in. Each sleep
state has a unique blink pattern. Default is Disabled.
NOTE: A normal shutdown goes to the S4 state.
S0 (On) = Solid white LED.
S3 (Stand By) = 3 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (white LED) — repeated
cycles of 3 blinks and a pause.
S4 (Hibernation) = 4 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (white LED) —
repeated cycles of 4 blinks and a pause.
S5 (Soft O) = LED is o.
Remote Management
Options
Intel Active Management Engine (ME) (Intel only). Default is Enabled.
Allows you to disable the Intel Management Engine, which disables Intel Active Management Technology
and all underlying Intel ME technologies. This option also disables ME functions that allow for ME
rmware updates.
Intel Active Management Technology (AMT) (Intel only). Default is Enabled.
Allows you to discover, repair, and protect networked computing devices. Disabling AMT does not disable
ME rmware updates.
USB Key Provisioning Support. Default is Disabled.
USB Redirection Support. Default is Enabled.
USB redirection allows USB devices plugged into a client computer to be transparently redirected to the
guest operating system.
Uncongure AMT on next boot. Default is Do Not Apply.
SOL Terminal Emulation Mode. Default is ANSI.
SOL terminal emulation mode is only activated during remote AMT redirection operations. The emulation
options allow administrators to select which mode works best with their console.
Show Uncongure ME Conrmation Prompt. Default is Enabled.
Verbose Boot Messages. Default is Enabled.
Verbose boot shows additional logging information during the boot. mainly for debugging if something
goes wrong during bootup.
Watchdog Timer. Default is Enabled.
Allows you to set amount of time for a operating system and BIOS watchdog alert to be sent if the timers
are not deactivated. BIOS watchdog is deactivated by BIOS and would indicate that a halt occurred during
execution if the alert is sent to the management console. An operating system alert is deactivated by the
operating system image and would indicate that a hang occurred during its initialization.
● OS Watchdog Timer (min). Default is 5 min.
● BIOS Watchdog Timer (min). Default is 5 min.
CIRA Timeout (min)
CIRA is Customer Initiated Remote Assistance, an Intel service to help users employing Active
Management Technology (AMT).
Electronic labels Displays system labels.
78 Chapter 5 Computer Setup (F10) Utility
To Next Page
Loading...
Need help?
General
