HP EliteOne G5 Service Manual

● Set a location for storing the test results. You can also set the user name and password settings used for
uploads.
● Display status information about the diagnostics run previously.
To customize Remote HP PC Hardware Diagnostics UEFI settings, follow these steps:
1. Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup.
2. Select Advanced, and then select Settings.
3. Make your customization selections.
4. Select Main, and then Save Changes and Exit to save your settings.
Your changes take eect when the computer restarts.
84 Chapter 6 Using HP PC Hardware Diagnostics

HP EliteOne G5 Specifications

General

Chipset	Intel Q370
Memory	Up to 64GB DDR4
Storage	Up to 2TB HDD or 1TB SSD
Graphics	Intel UHD Graphics 630
Display	23.8"
Audio	Bang & Olufsen
Networking	Bluetooth 5.0
Ports	USB 3.1
Operating System	Windows 10 Pro
CPU	Intel Core i5/i7 (9th Gen)