g. Remove the webcam/microphone module (2) from the display panel assembly.
h. Release the ZIF connector (1) the webcam/microphone module cable is connected to, and then
disconnect the webcam/microphone module cable (2) from the webcam/microphone module.
The webcam/microphone module is available using spare part number N91020-001. The
webcam/microphone module cable is available using spare part number N91015-001.
i. When replacing the webcam/microphone module, install the rubber bumpers onto the
webcam/microphone module. Be sure that the rubber bumpers do not cover the microphone
holes on the webcam/microphone module.
13. To remove the display panel cable:
Display assembly
49
To Next Page
Loading...
