HP HP-18C - Copying a List Number to the Calculator Line; Creating New Number Lists; Naming and Renaming Number Lists

Copying a List Number to the Calculator
Line
To copy a number in the list into the calculator line, position the list
pointer at that number and press I RCL II INPUT I.
Creating New Number Lists
A number list is created when:
• The HP-18C displays the CFLO and SUM menus for the first time .
•
You create a list by pressing BII , then IIIIDI.
When a list is created, it is empty and nameless. The HP-18C allows
you to
have, at most, one nameless list of each type.
Naming and Renaming Number Lists
A new number list has no name . Providing the list with a name helps
you to locate it later, and also enables you to have more than one list
of a
particular type (for example, more than one SUM list).
To name a list:
1. Press 1I'JmI .
2. Type the name and press II NPUT I.
List names can be up to 22 characters long and can include any char-
acters. The first four or five characters (some letters are wider than
others) of the name become a menu label in the GET menu . For exam-
ple, if you had three CFLO number lists named LOAN, LANDSALE, and
LEASEPMTS, pressing BII in the CFLO menu would display the
menu shown in figure 7-1.
7: Working With Number Lists 111