HP integrity rx2900 i4 User Manual

7. Install the component as described above.
Removing and replacing the intrusion switch cable
The intrusion switch screws face CPU 0.
1. Power off the server (“Powering off the server” (page 99)).
2. Remove the access panel (“Removing and replacing the access panel” (page 106)).
3. Remove the PCI riser cage (“Removing and replacing the PCI riser cage” (page 111)).
4. Open the processor cage.
5. Using a screwdriver, remove the switch.
HP Confidential Removing and replacing the intrusion switch cable 125

HP integrity rx2900 i4 Specifications

General

Brand	HP
Model	integrity rx2900 i4
Category	Server
Language	English