Figure 17 Device Manager screen
To perform maintenance on the system such as adding, deleting, or reordering boot options, press
M to launch the Boot Maintenance Manager.
Figure 18 Boot Maintenance Manager screen
To perform more advanced operations, press S to launch the UEFI Shell.
To view the iLO LAN configuration, press I to launch the iLO Setup Tool.
Saving UEFI configuration settings
You can configure other UEFI settings at this time. For more UEFI configuration options, see the HP
Integrity rx2800 i4 Server User Service Guide.
Booting and installing the operating system
From the UEFI Front Page prompt, you can boot and install in either of two manners:
• If your OS is loaded onto your server, see “Operating system is loaded onto the server”
(page 31).
• If the OS is not installed onto your server, see “Operating system is not loaded onto the server”
(page 31).
HP Confidential30 Installing the server
To Next Page
Loading...
Need help?
General