Chapter 5
Troubleshooting
Troubleshooting Using Offline Support Tools
82
****** All Rights Reserved ******
****** ******
****** HP shall not be liable for any damages resulting from the ******
****** use of this program. ******
****** ******
****** TC Version B.00.10 ******
****** SysLib Version B.00.06 ******
****** Mapfile Version B.01.05 ******
****** ******
***************************************************************************
Type HELP for command information.
ODE> ls
Modules on this boot media are:
filename type size created description
-----------------------------------------------------------------------------
CIODIAG2.EFI TM 642560 06/06/2003 Core IO diagnostic
CPUDIAG.EFI TM 737280 06/06/2003 Processor diagnostic
IODIAG.EFI TM 143872 06/06/2003 Runs selftests on I/O modules
MAPPER.EFI TM 1653248 06/06/2003 System mapping utility
MEMDIAG.EFI TM 263168 06/06/2003 Memory diagnostic
PERFVER.EFI TM 814592 06/06/2003 Runs ROM-based selftests on peripherals
PLUTODIAG.EFI TM 514560 06/06/2003 SBA/LBA diagnostic
COPYUTIL.EFI TM 1041920 06/06/2003 Disk-to-tape copy utility
DFDUTIL.EFI TM 850432 06/06/2003 Disk firmware download utility
FCFUPDATE.EFI TM 608256 06/06/2003 FW Update Utility for Fibre Channel
ODE>
Management Processor (MP) Event Logs
The MP interface provides diagnostic and configuration capabilities. To access your MP interface, perform the
following steps:
NOTE The MP interface must be accessed from a terminal console that is attached to the MP via the
MP LAN or MP remote serial connector.
Step 1. If necessary, press
CTRL+B to access the MP interface.
Step 2. Log in with proper user name and password.
To Next Page
Loading...
Need help?
General