Using Your hp iPAQ h2200 Series
Reference Guide 1–19
DRAFT - Revised 10/16/02
hp CONFIDENTIAL 12/3/02
File: ch1-UsingtheH2200.fm PN: 293146-001
3. When the power indicator on the top of the h2200 turns solid
amber, the h2200 unit is fully charged and you may
disconnect the AC adapter. The approximate time to fully
charge a unit is four hours.
✎
The amber charge light blinks while the battery is recharging, and
turns solid (nonblinking) when the battery is fully charged.
Charging with the Synchronization Cable
1. Plug one end of the synchronization cable into the
communications port on the bottom of your iPAQ h2200 unit.
2. Plug the AC adapter into an electrical outlet and connect the
other end of the AC adapter to the AC connector on the
synchronization cable.
✎
The amber charge light blinks while the battery is recharging, and
turns solid (nonblinking) when the battery is fully charged.
To Next Page
Loading...
