1–20 Reference Guide
Using Your hp iPAQ h2200 Series
DRAFT - Revised 10/16/02
hp CONFIDENTIAL 12/3/02
File: ch1-UsingtheH2200.fm PN: 293146-001
✎
To prevent loss of power to the h2200, always connect the AC
adapter to the h2200 when synchronizing with a host computer.
Charging with the Synchronization Cradle
Use the synchronization cradle to:
■ Charge the iPAQ h2200 Series
■ Synchronize the iPAQ h2200 Series with your computer (for
information on synchronizing, refer to the previous section in
this chapter, “Setting up the iPAQ h2200 Series”)
■ Recharge the battery of an optional battery pack, if you have
purchased one
To charge the iPAQ h2200 Series using the synchronization
cradle:
1. Plug the AC adapter into an electrical outlet and connect the
other end of the AC adapter to the AC connector on the
synchronization cradle.
To Next Page
Loading...
