HP LASERJET ENTERPRISE 500 - Figure 4-1 Mac Installer Opening Screen; Mac os X Installation; Main Install Dialog Box Sequence

3. Follow the onscreen instructions to complete the software installation.
NOTE: If you are installing the printing-system software on a Macintosh OS X system, be patient.
The installer must perform an initial search of the computer for up to 1 minute. During this time the
installer might appear to be stalled.
4. When software installation is complete, click Close.
Mac OS X installation
This section provides information about the various installation dialog-box sequences for the Mac OS X
operating system.
Main Install dialog box sequence
NOTE: If you are connecting the product to a network or with a USB cable, connect the network
cable to the network port.
1. Insert the HP LaserJet Enterprise 500 color M551 printing-system software CD in the CD-ROM
drive.
NOTE: If the CD screen does not open automatically when the CD is put into the CD-ROM drive,
double-click the CD-ROM icon on the desktop to open the installer folder.
2. The installer program opens.
Figure 4-1 Mac installer opening screen
NOTE: The file name displayed on your HP LaserJet installer browser screen may be different
than the file name displayed in the above figure.
NOTE: In the HP LaserJet installer browser screen, double-click the Documents icon to gain
access to the product user guide. You can also select a language folder and locate the available
ReadMe file which is in .htm format.
122 Chapter 4 Mac OS X software and utilities ENWW