HP LASERJET ENTERPRISE 500 - Figure 4-26 Ipv4 Settings Screen; Network Settings

Network Settings
In the Printer Settings section of the HP Utility, select Network Settings to open the IP Settings
screen.
Figure 4-26 IPv4 Settings screen
The Network Settings screen provides access to IPv4, IPv6, Bonjour Settings, and Other
Settings.
Select Configuration, to modify the following settings:
●
DHCP
●
BootP
●
Manual
You can also use this screen to modify the following settings:
●
Host Name
●
IP Address
●
Subnet Mask
●
Default Gateway
To save new settings, click Apply Now.
To view and change other network settings, click Other Settings, then clickAdditional Network
Settings.
If a user name and password have been set, you might need to obtain them from your IT administrator.
For more information, see the HP EWS online help.
ENWW
HP Printer Utility for Mac
147