●
For wired network connected products, follow these steps:
a. Select the Connect through a wired network option.
Figure 2-4 Software installation — Connection Type screen for network connected
installation
b. If the product's network settings are not known, select the Automatically find my
product on the network option.
c. If the product's networking settings are known, enter either the product's host name, IP
address, or hardware address.
NOTE: The product's network IP address can be obtained at the product control
panel. From the product control panel's Main Menu, select How to Connect and then
press the OK button. Select Network Address and then press the OK button to display
the IP address.
d. Click the Next button.
ENWW
Detailed Microsoft Windows installation instructions
35
To Next Page
Loading...
