To restrict color-printing access to a network-connected HP LaserJet Enterprise 500 color M551 from the
product control panel, follow these steps:
1.
Press the Home button
to return to the main screen, if needed.
2. Press the up arrow
or the down arrow to scroll to Administration, and then press the OK
button.
3. Press the up arrow
or the down arrow to scroll to General Settings, and then press the OK
button.
4. Press the up arrow
or the down arrow to scroll to Restrict Color, and then press the OK
button.
5. Press the up arrow
or the down arrow to scroll to one of the following options, and then press
the desired option:
●
Enable Color. This is the default setting. Use of color-printing features is unrestricted.
●
Disable Color. This setting denies the use of color-printing features to all users.
●
Color if Allowed. Network administrators can use this setting to allow color-printing to
certain users and restrict it for other users. User privileges can be set using HP EWS. For
more information, see the EWS online help.
ICC/CMS
HP provides cyan-magenta-yellow-black (CMYK) and standard red-green-blue (sRGB) International
Color Consortium (ICC) profiles with the product. The CMYK profile can only be used with a postscript
print driver; the sRGB profile can be used with any of the product print drivers. The profiles are
available at the following HP Web site under software downloads:
www.hp.com/support/lj500colorM551
The ICC profiles describe the way that color will be interpreted in the default CMYK and RGB modes.
These profiles can be used for color conversions in a color-managed workflow. The sRGB profile
matches the default RGB mode (sRGB), which is enabled with the Default (sRGB) or Color setting in
either a PCL or postscript print driver. The product interprets CMYK data according to the Specifications
for Web Offset Publications (SWOP) simulation when Default CMYK+ is the selected CMYK Color
setting in the postscript print driver, and a more accurate SWOP rendering can be produced by
selecting the SWOP setting. This standard defines how a particular set of CMYK ink colors should
behave. Emulation for Dainippon Press (DIC) and Euro-standard CMYK inks used in Asia and Europe
are also available and can be selected from the print driver.
PANTONE color matching
PANTONE has multiple color matching systems. The PANTONE MATCHING SYSTEM® is very popular
and uses solid inks to generate a wide range of color hues and tints. See
www.hp.com/go/
lj500colorM551_software for details on how to use PANTONE Colors with this product.
NOTE: PANTONE Colors generated might not match PANTONE-identified standards. Consult current
PANTONE Publications for accurate color.
ENWW
Advanced color use
25
To Next Page
Loading...
