HP LASERJET ENTERPRISE 500 - Duplex Mode; Figure 4-22 Output Devices Screen; Figure 4-23 Duplex Mode Screen

If no paper handling devices are installed, the Output Devices screen will appear as shown in Figure
4-22 Output Devices screen on page 144.
Figure 4-22 Output Devices screen
Various options can be selected when an output device is installed. For example, the HP 500-Sheet
Stapler/Stacker options are listed below:
●
Click the Stapling Mode drop-down list to change the stapler/stacker stapling mode.
●
Click one of the Staple-out Mode options to change the product behavior when the staple
cartridge runs out of staples.
Duplex mode
For the HP LaserJet Enterprise 500 color M551dn and HP LaserJet Enterprise 500 color M551xh
product models, the Printer Settings section includes a Duplex Mode setting. Click this setting to
open the Duplex Mode screen.
Figure 4-23 Duplex Mode screen
144 Chapter 4 Mac OS X software and utilities ENWW