●
Device Settings tab features
●
About tab features
Change the print driver settings for Windows
Operating
System
To change the settings for
all print jobs until the
software program is
closed
To change the default
settings for all print jobs
To change the device
configuration settings
Windows 7, XP,
Server 2003, Server
2008, and Vista
1. On the File menu in the
software program, click
Print.
2. Select the driver, and then
click Properties or
Preferences.
The steps can vary; this
procedure is most common.
1. Click Start, click
Settings, and then click
Devices and Printers
(Windows 7) or Printers
and Faxes (Windows XP
Professional and Server
2003) or Printers and
Other Hardware
Devices (Windows XP
Home).
For Windows Vista, click
Start, click Control
Panel, and then click
Printer.
2. Right-click the driver icon,
and then select Printing
Preferences.
1. Click Start, click
Settings, and then click
Devices and Printers
(Windows 7) or Printers
and Faxes (Windows XP
Professional and Server
2003) or Printers and
Other Hardware
Devices (Windows XP
Home).
For Windows Vista, click
Start, click Control
Panel, and then click
Printer.
2. Right-click the driver icon,
and then select
Properties or Printer
Properties.
3. Click the Configure tab or
the Device Settings tab.
To gain access to driver settings from within most software programs, click File, click Print, and then
click Properties or Preferences. The appearance and names of the driver tabs that appear can
vary, depending on the operating system. These settings apply only while the software program is
open.
50 Chapter 3 HP PCL 6 print driver for Windows ENWW
To Next Page
Loading...
