Use the Enable Duplex Mode command to print internal diagnostic and test pages on both sides of the
page.
1. Select the Enable Duplex Mode check box. This box is clear by default.
2. Click Apply Now to enable printing on both sides of the page.
Protect Direct Ports
In the Printer Settings section of the HP Utility, select Protect Direct Ports to disable printing over
USB and parallel ports. JetDirect, embedded network connectivity, and third-party add-on cards, such
as FireWire, will not be affected by this setting.
Figure 4-24 Protect Direct Ports screen
Click Disable Direct Ports.
ENWW
HP Printer Utility for Mac
145
To Next Page
Loading...
