Watermarks
Use the Watermarks feature to select a watermark, create a new watermark (text only), or edit an
existing watermark. The following watermarks are preset in the driver:
●
(none)
●
[Username]
●
Confidential
●
Draft
●
SAMPLE
The Watermarks feature can be configured using the Driver Configuration Utility.
If the [Username] watermark is selected, the driver will use the network username of the logged in
user for the watermark.
The drop-down menu shows alphabetically sorted watermarks that are currently available on the
system, plus the string "(none)," which indicates that no watermark is selected. This is the default
setting. Any watermark that is selected from this list appears in the preview image.
When the First Page Only check box is selected, the watermark is printed only on the first page of
the document. The First Page Only check box is disabled when the current watermark selection is
"(none).”
Watermarks are applied to logical pages. For example, when Pages per Sheet is set to "4" and
First Page Only is turned off, four watermarks appear on the physical page (one on each logical
page).
Click Edit, and the Watermark Details dialog box appears.
Figure 3-13 Watermark Details dialog box
The dialog box shows a preview image and provides options for creating a new watermark and
controlling the message angle and font attributes.
ENWW
Effects tab features
79
To Next Page
Loading...
