Custom width and height control limits
The minimum paper size for the HP LaserJet Enterprise 500 color M551 product is 76 x 127 mm (3 x 5
in) and the maximum in Tray 1 is 215.9 x 355.6 mm (8.5 x 14 in). The following table summarizes
paper size limits for each paper-handling device.
NOTE: Custom media size is 148 x 215.9 mm to 210 x 355.6 mm (5.83 x 8.5 in to 8.27 x 14 in).
Table 3-2 Custom paper sizes
Tray Dimensions Minimum Maximum
Tray 1 (100-sheet
multipurpose)
Width 76 mm (3 in) 215.9 mm (8.5 in)
Length 127 mm (5 in) 355.6 mm (14 in)
Tray 2 (250-sheet) Width 101.6 mm (4.0 in) 215.9 mm (8.5 in)
Length 148 mm (5.83 in) 297 mm (11.69 in)
Trays 3 — 6 (500-sheet) Width 148.0 mm (5.83 in) 215.9 mm (8.5 in)
Length 210 mm (8.27 in) 355.6 mm (14.0 in)
Paper source
The Paper source setting specifies the source tray to use for printing a document. The list of source
trays depends on the product accessories that are installed. Any optional source trays that are installed
through the Device Settings tab also appear here.
The Paper source drop-down menu can contain the following options, depending on what has been
installed on the product:
●
Automatically Select
●
Printer auto select
●
Manual Feed in Tray 1
●
Tray 1 (100-sheet multipurpose tray)
●
Tray 2 (250-sheet tray)
The default setting is Automatically Select. When this setting is selected, the HP LaserJet Enterprise
500 color M551 uses the source tray that supports the paper size that you have selected. If you select
a source tray other than Automatically Select, make sure that the correct paper size is loaded in the
source tray. For information about paper sources, see
Paper attributes and commands on page 152 .
Paper type
The Paper type drop-down menu shows the first few paper types that the HP LaserJet Enterprise 500
color M551 supports and an entry for More. Clicking More opens the Type is: dialog box. Click the
68 Chapter 3 HP PCL 6 print driver for Windows ENWW
To Next Page
Loading...
