d. To prevent your product from printing unexpected documents, click ePrint Settings, and
then click the Allowed Senders tab. Click Allowed Senders Only, and add the e-mail
addresses from which you want to allow ePrint jobs.
e. To set up default settings for all ePrint jobs sent to this product, click ePrint Settings, click
Print Options, and select the settings that you want to use.
8. Click the Finish button to complete the installation.
Install optional software
Use the following steps to install optional software programs:
1. Insert the HP LaserJet Enterprise 500 color M551 software CD into the CD-ROM drive. The
installer program should open.
If the installer program has not started after 30 seconds, complete these steps:
a. On the Start menu, click Run.
b. Type the following: X:\SETUP.EXE (where X is the letter of the CD-ROM drive).
c. Click the OK button.
2. Click the More Options menu.
NOTE: All of the software listed in the following steps is available via Web download only and
does not come on the product software CD.
3. Click the Admin Software button to gain access to the following software:
●
HP Universal Print Driver Portal (Online)
●
HP Web Jetadmin (Online)
●
HP Driver Deployment Utility (Online)
38 Chapter 2 Install Windows software and utilities ENWW
To Next Page
Loading...
