Document feeder rollers
1. Open the document feeder cover.
Figure 1-12 Remove the document feeder rollers (1 of 2)
2. On the underside of the document feeder cover, use a small flat-blade screwdriver to release the
tabs (callout 1) on the left side of each roller, and then pull the rollers out of the cover.
Figure 1-13 Remove the document feeder rollers (2 of 2)
1
ENWW
Removal and replacement procedures
11
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com
To Next Page
Loading...