Top cover
1. Remove the following components:
●
Tray 2 cassette
●
Left cover. See
Left cover on page 13.
●
Scanner assembly. See
Scanner assembly on page 13.
●
Control panel. See
Control panel on page 15.
●
Right cover. See
Right cover on page 17.
2. Open the toner cartridge door and the rear jam access door.
3. On the left side of the product, disconnect one flat, flexible cable (callout 1) from the formatter.
Figure 1-23 Remove the top-cover assembly (1 of 3)
1
18 Chapter 1 Removal and replacement ENWW
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com
To Next Page
Loading...