HP laserjet pro 400 mfp - Duplex solenoid

4. Remove one screw (callout 1), and then remove the Tray 1 pickup solenoid.
Figure 1-48 Remove the Tray 1 pickup solenoid (2 of 2)
1
Duplex solenoid
1. Remove the following components:
●
Tray 2 cassette
●
Left cover. See
Left cover on page 13.
●
Scanner assembly. See
Scanner assembly on page 13.
●
Control panel. See
Control panel on page 15.
●
Right cover. See
Right cover on page 17.
●
Rear cover, rear door, and duplex-paper-feed assembly. See
Rear cover, rear door, and feed
assembly on page 20.
●
Top cover assembly. See
Top cover on page 18.
●
Fan. See
Fan on page 39.
●
Duplex drive assembly. See
Duplex drive assembly on page 31.
2. Open the toner cartridge door and the rear jam access door.
ENWW
Removal and replacement procedures
35
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com