HP laserjet pro 400 mfp - Formatter PCA; Wireless PCA

Formatter PCA
WARNING! ESD sensitive component.
1. Remove the following components:
●
Tray 2 cassette
●
Left cover. See
Left cover on page 13.
●
Wireless PCA (wireless models only). See
Wireless PCA on page 48.
2. On the left side of the product, disconnect any connectors and flat cables (callout 1) on the
formatter, and then remove six screws (callout 2).
Figure 1-68 Remove the formatter
1
2
2
Wireless PCA
NOTE: This section applies to wireless models only.
The wireless PCA is located at the top of the formatter PCA.
1. Remove the following components:
●
Tray 2 cassette
●
Left cover. See
Left cover on page 13.
48 Chapter 1 Removal and replacement ENWW
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com