Solenoids
Tray 1 solenoid
1. Remove the following components:
●
Tray 2 cassette
●
Left cover. See
Left cover on page 13.
2. Open the toner cartridge door and the rear jam access door.
3. On the left side of the product, disconnect one connector (callout 1), and then release the wires
from the wire harness (callout 2).
Figure 1-47 Remove the Tray 1 pickup solenoid (1 of 2)
1
2
34 Chapter 1 Removal and replacement ENWW
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com
To Next Page
Loading...