5. Remove two screws (callout 1), unroute the cables from the guides (callout 2), and then remove the
fan cable guide.
Figure 1-45 Remove the duplex drive assembly (3 of 4)
1
2
6. Remove three screws (callout 1), and then pull the drive assembly (callout 2) away from the
product.
Figure 1-46 Remove the duplex drive assembly (4 of 4)
2
1
CAUTION: Some of the gears and the solenoid arm are not captive. Do not lose the gears or
the arm when you remove the assembly.
ENWW
Removal and replacement procedures
33
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com
To Next Page
Loading...