4. On the right side and the rear of the product, remove three screws (callout 1).
Figure 1-24 Remove the top-cover assembly (2 of 3)
1
5. On the top-cover assembly, remove four screws (callout 1).
Figure 1-25 Remove the top-cover assembly (3 of 3)
1
6. Lift the top-cover assembly off of the product to remove it.
ENWW
Removal and replacement procedures
19
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com
To Next Page
Loading...