4. In the cavity behind the control panel, remove two screws (callout 1)
Figure 1-20 Remove the control panel (2 of 3)
1
5. Pull the top of the control panel assembly away from the product to release the tab (callout 1) at
the back of the assembly, and then pull the control panel away from the product.
Figure 1-21 Remove the control panel (3 of 3)
1
16 Chapter 1 Removal and replacement ENWW
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com
To Next Page
Loading...