HP MSR1003-8S User Manual

100
Syntax
ntp-service enable
undo ntp-service enable
Default
The NTP service is not enabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable the NTP service.
<Sysname> system-view
[Sysname] ntp-service enable
ntp-service inbound enable
Use ntp-service inbound enable to enable an interface to process NTP messages.
Use undo ntp-service inbound enable to disable an interface from processing NTP messages.
Syntax
ntp-service inbound enable
undo ntp-service inbound enable
Default
An interface processes NTP messages.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
Execute the undo ntp-service inbound enable command on an interface in the following cases:
• You do not want the interface to synchronize the peer device in the corresponding subnet.
• You do not want the device to be synchronized by the peer device in the subnet corresponding to
the interface.
Examples
# Disable GigabitEthernet 2/0/1 from processing NTP messages.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] undo ntp-service inbound enable

HP MSR1003-8S Specifications

General

Brand	HP
Model	MSR1003-8S
Category	Network Router
Language	English