263
Related commands
• action set
• context
• snmp mib event owner
wildcard context (trigger view)
Use wildcard context to enable the context of an object to be wildcarded.
Use undo wildcard context to restore the default.
Syntax
wildcard context
undo wildcard context
Default
The context of an object is fully specified.
Views
Trigger view
Predefined user roles
network-admin
Usage guidelines
Use this command in conjunction with the context command to enable the context specified by the
context command to be wildcarded. For example, you can use contextname to wildcard to contextname1,
contextname2, and so on.
Examples
# Enable the context contextname to be wildcarded.
<Sysname> system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] context contextname
[Sysname-trigger-owner1-triggerA] wildcard context
Related commands
• context
• snmp mib event trigger
wildcard oid (action-set view)
Use wildcard oid to enable the set-action object OID to be wildcarded.
Use undo wildcard oid to restore the default.
Syntax
wildcard oid
undo wildcard oid
To Next Page
Loading...
Need help?
General
