404
Syntax
ipv6 netstream export v9-template refresh-rate time minutes
undo ipv6 netstream export v9-template refresh-rate time
Default
Version 9 templates are resent every 30 minutes.
Views
System view
Predefined user roles
network-admin
Parameters
minutes: Specifies the refresh interval in the range of 1 to 3600 minutes.
Usage guidelines
An IPv6 NetStream server uses version 9 templates to parse the data from the NetStream device, but the
server does not permanently save version 9 templates.
For an IPv6 NetStream server to use correct version 9 templates, configure the refresh frequency or
refresh interval for version 9 templates. If both settings are configured, templates are sent when either of
the conditions is met.
To configure the refresh frequency for version 9 templates, use the ipv6 netstream export v9-template
refresh-rate packet command.
Examples
# Configure the device to send version 9 templates every 60 minutes.
<Sysname> system-view
[Sysname] ipv6 netstream export v9-template refresh-rate time 60
Related commands
ipv6 netstream export v9-template refresh-rate packet
ipv6 netstream export version 9
Use ipv6 netstream export version 9 to export IPv6 NetStream data in the version 9 format and choose
whether to record data about AS and BGP next hop information.
Use undo ipv6 netstream export version to restore the default.
Syntax
ipv6 netstream export version 9 [ origin-as | peer-as ] [ bgp-nexthop ]
undo ipv6 netstream export version
Default
The version 9 format is used to export IPv6 NetStream traditional data, IPv6 NetStream aggregation data,
and MPLS flow data with IPv6 fields.
The peer AS numbers are recorded. The BGP next hop is not recorded.
To Next Page
Loading...
Need help?
General
