EasyManuals Logo

HP MSR1003-8S User Manual

HP MSR1003-8S
471 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #384 background imageLoading...
Page #384 background image
373
ip netstream
Use ip netstream to enable NetStream on an interface.
Use undo ip netstream to disable NetStream on an interface.
Syntax
ip netstream { inbound | outbound }
undo ip netstream { inbound | outbound }
Default
NetStream is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
inbound: Enables NetStream for incoming traffic.
outbound: Enables NetStream for outgoing traffic.
Examples
# Enable NetStream for incoming traffic on GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] ip netstream inbound
ip netstream { inbound | outbound } filter
Use ip netstream filter to enable NetStream filtering on an interface.
Use undo ip netstream filter to disable the function.
Syntax
ip netstream { inbound | outbound } filter acl acl-number
undo ip netstream { inbound | outbound } filter
Default
NetStream filtering is disabled. NetStream collects statistics about all IPv4 packets passing through an
interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
inbound: Filters incoming traffic.

Table of Contents

Other manuals for HP MSR1003-8S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP MSR1003-8S and is the answer not in the manual?

HP MSR1003-8S Specifications

General IconGeneral
BrandHP
ModelMSR1003-8S
CategoryNetwork Router
LanguageEnglish

Related product manuals