247
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] test threshold
[Sysname-trigger-owner1-triggerA-threshold] object list owner owner1 name objectA
Related commands
• snmp mib event trigger
• test
object list owner (trigger view)
Use object list owner to specify an object list for a trigger.
Use undo object list to restore the default.
Syntax
object list owner objects-owner name objects-name
undo object list
Default
No object list is specified for a trigger.
Views
Trigger view
Predefined user roles
network-admin
Parameters
owner objects-owner: Specifies the owner of an object list. Specify the trigger owner for the
objects-owner argument.
name objects-name: Specifies the name of an object list, a case-sensitive string of 1 to 32 characters.
Usage guidelines
An object list is identified by its owner and name. After you specify a list of objects for a trigger, the
objects in the list are added to the notification when the notification action is triggered.
You can configure the object list owner command in trigger view, trigger-test view (including
trigger-Boolean view, trigger existence view, and trigger threshold view), and notification view. If the
command is configured in any two of the views or all the three views, the object lists are added to the
notification in the sequence: trigger view, trigger-test view, and notification view.
Examples
# Specify the object list with the owner owner1 and name objectA for a trigger.
<Sysname> system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] object list owner owner1 name objectA
Related commands
snmp mib event trigger
To Next Page
Loading...
Need help?
General
