HP MSR1003-8S

204
plaintext authentication key 123 456 T ES Ta ut h &! , and the plaintext privacy key 123 45 6T ESTe n cr &! for the
user.
<Sysname> system-view
[Sysname] snmp-agent group v3 testGroup privacy
[Sysname] snmp-agent usm-user v3 testUser testGroup simple authentication-mode sha
123456TESTauth&! privacy-mode aes128 123456TESTencr&!
# For an NMS to access the MIB objects in the default view ViewDefault, make sure the following
configurations on the NMS are the same as the SNMP agent:
• SNMPv3 username.
• SNMP protocol version.
• Authentication algorithm.
• Privacy algorithm.
• Plaintext authentication and privacy keys.
# Add the user remoteUser for the SNMP remote engine at 10 .1.1.1 t o t h e S N M P v 3 g r o u p testGroup, and
enable the authentication and privacy security model for the group. Specify the authentication algorithm
SHA-1, the privacy algorithm AES, the plaintext authentication key 123456TESTauth&!, and the plaintext
privacy key 123456 T ES Te n cr &! for the user.
<Sysname> system-view
[Sysname] snmp-agent remote 10.1.1.1 engineid 123456789A
[Sysname] snmp-agent group v3 testGroup privacy
[Sysname] snmp-agent usm-user v3 remoteUser testGroup remote 10.1.1.1 simple
authentication-mode sha 123456TESTauth&! privacy-mode aes128 123456TESTencr&!
In RBAC mode:
# Create the SNMPv3 user testUser with the user role network-operator and enable the authentication
without privacy security model for the user. Specify the authentication algorithm SHA-1 and the
authentication key 123456TESTplat&! in plain text for the user.
<Sysname> system-view
[Sysname] snmp-agent usm-user v3 testUser user-role network-operator simple
authentication-mode sha 123456TESTplat&!
# For an NMS to have read-only access to all MIB objects, make sure the following configurations on the
NMS are the same as the SNMP agent:
• SNMPv3 username.
• SNMP protocol version.
• Authentication algorithm and key.
Related commands
• display snmp-agent usm-user
• snmp-agent calculate-password
• snmp-agent group
• snmp-agent remote
• snmp-agent usm-user v3 user-role
snmp-agent usm-user v3 user-role
Use snmp-agent usm-user v3 user-role to assign a user role to an SNMPv3 user created in RBAC mode.