HP MSR1003-8S

270
CWMP commands
cwmp
Use cwmp to enter CWMP view.
Syntax
cwmp
Views
System view
Predefined user roles
network-admin
Examples
# Enter CWMP view.
<Sysname> system-view
[Sysname] cwmp
Related commands
cwmp enable
cwmp acs default password
Use cwmp acs default password to configure a password for authentication to the default ACS URL.
Use undo cwmp acs default password to restore the default.
Syntax
cwmp acs default password { cipher | simple } password
undo cwmp acs default password
Default
No password is configured for authentication to the default ACS URL.
Views
CWMP view
Predefined user roles
network-admin
Parameters
cipher: Specifies a password in ciphertext.
simple: Specifies a password in plain text. For security purposes, all passwords, including passwords
configured in plain text, are saved in ciphertext.