HP MSR1003-8S

356
Port mirroring commands
display mirroring-group
Use display mirroring-group to display mirroring group information.
Syntax
display mirroring-group { group-id | all | local }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-id: Specifies a mirroring group by its number in the range of 1 to 6.
all: Specifies all mirroring groups.
local: Specifies local mirroring groups.
Usage guidelines
Mirroring group information includes the type, status, and content of a mirroring group. It is sorted by
mirroring group number.
Examples
# Display information about all mirroring groups.
<Sysname> display mirroring-group all
Mirroring group 1:
Type: Local
Status: Active
Mirroring port:
GigabitEthernet2/0/1 Inbound
Monitor port: GigabitEthernet2/0/2
Mirroring group 3:
Type: Local
Status: Active
Mirroring port:
GigabitEthernet2/0/1 Inbound
GigabitEthernet2/0/2 Both
Monitor port: GigabitEthernet2/0/3
Table 78 Command output
Field Descri
p
tion
Mirroring group Number of the mirroring group.