Name: HP MSR1003-8S
Brand: HP
Rating: 4 (1 reviews)

To Next Page

To Previous Page

355

rate: Specifies the sampling rate in the range of 1 to 65536.

Usage guidelines

This command takes effect on all cards. (Distributed devices in standalone mode/distributed devices in

IRF mode.)

Examples

# Create sampler abc in fixed sampling mode. Set the sampling rate to 256, which means the first packet

out of 256 packets is sampled.

<Sysname> system-view

[Sysname] sampler abc mode fixed packet-interval 256

Table of Contents3
Ping, Tracert, and System Debugging Commands12
- Debugging12
- Display Debugging13
- Ping13
- Ping Ipv616
- Tracert19
- Tracert Ipv620
NQA Commands23
- NQA Client Commands23
- NQA Server Commands88
NTP Commands93
- Display Ntp-Service Ipv6 Sessions93
- Display Ntp-Service Sessions98
- Display Ntp-Service Status102
- Display Ntp-Service Trace104
- Ntp-Service Acl105
- Ntp-Service Authentication Enable107
- Ntp-Service Authentication-Keyid107
- Ntp-Service Broadcast-Client108
- Ntp-Service Broadcast-Server109
- Ntp-Service Dscp110
- Ntp-Service Enable110
- Ntp-Service Inbound Enable111
- Ntp-Service Ipv6 Acl112
- Ntp-Service Ipv6 Dscp113
- Ntp-Service Ipv6 Inbound Enable113
- Ntp-Service Ipv6 Multicast-Client114
- Ntp-Service Ipv6 Multicast-Server115
- Ntp-Service Ipv6 Source116
- Ntp-Service Ipv6 Unicast-Peer117
- Ntp-Service Ipv6 Unicast-Server118
- Ntp-Service Max-Dynamic-Sessions119
- Ntp-Service Multicast-Client120
- Ntp-Service Multicast-Server121
- Ntp-Service Refclock-Master122
- Ntp-Service Reliable Authentication-Keyid123
- Ntp-Service Source123
- Ntp-Service Unicast-Peer124
- Ntp-Service Unicast-Server126
SNTP Commands128
- Display Sntp Ipv6 Sessions128
- Display Sntp Sessions129
- Sntp Authentication Enable129
- Sntp Authentication-Keyid130
- Sntp Enable131
- Sntp Ipv6 Unicast-Server131
- Sntp Reliable Authentication-Keyid133
- Sntp Unicast-Server133
Poe Commands136
- Apply Poe-Profile136
- Apply Poe-Profile Interface137
- Display Poe Device138
- Display Poe Interface139
- Display Poe Interface Power142
- Display Poe Power-Usage143
- Display Poe Pse146
- Display Poe Pse Interface148
- Display Poe Pse Interface Power150
- Display Poe-Power151
- Display Poe-Profile155
- Display Poe-Profile Interface156
- Poe Disconnect156
- Poe Enable157
- Poe Enable Pse158
- Poe Legacy Enable158
- Poe Max-Power159
- Poe Max-Power (System View)160
- Poe Pd-Description160
- Poe Pd-Policy Priority161
- Poe Priority162
- Poe Priority (System View)163
- Poe Pse-Policy Priority163
- Poe Update164
- Poe-Profile165
- Poe Utilization-Threshold166
SNMP Commands167
- Display Snmp-Agent Community167
- Display Snmp-Agent Context169
- Display Snmp-Agent Group169
- Display Snmp-Agent Local-Engineid170
- Display Snmp-Agent Mib-Node171
- Display Snmp-Agent Mib-View177
- Display Snmp-Agent Remote179
- Display Snmp-Agent Statistics180
- Display Snmp-Agent Sys-Info182
- Display Snmp-Agent Trap Queue182
- Display Snmp-Agent Trap-List183
- Display Snmp-Agent Usm-User183
- Enable Snmp Trap Updown185
- Snmp-Agent186
- Snmp-Agent Calculate-Password187
- Snmp-Agent Community188
- Snmp-Agent Community-Map191
- Snmp-Agent Context192
- Snmp-Agent Group192
- Snmp-Agent Local-Engineid195
- Snmp-Agent Log196
- Snmp-Agent Mib-View196
- Snmp-Agent Packet Max-Size198
- Snmp-Agent Port198
- Snmp-Agent Remote199
- Snmp-Agent { Inform | Trap } Source200
- Snmp-Agent Sys-Info Contact201
- Snmp-Agent Sys-Info Location201
- Snmp-Agent Sys-Info Version202
- Snmp-Agent Target-Host203
- Snmp-Agent Trap Enable205
- Snmp-Agent Trap If-Mib Link Extended206
- Snmp-Agent Trap Life207
- Snmp-Agent Trap Log207
- Snmp-Agent Trap Queue-Size208
- Snmp-Agent Usm-User { V1 | V2C209
- Snmp-Agent Usm-User V3211
- Snmp-Agent Usm-User V3 User-Role215
RMON Commands217
- Display Rmon Alarm217
- Display Rmon Event219
- Display Rmon Eventlog220
- Display Rmon History222
- Display Rmon Prialarm224
- Display Rmon Statistics227
- Rmon Alarm229
- Rmon Event231
- Rmon History232
- Rmon Prialarm233
- Rmon Statistics235
Event MIB Commands237
- Action237
- Comparison238
- Context (Action-Set View)239
- Context (Trigger View)239
- Delta Falling240
- Delta Rising241
- Description (Event View)242
- Description (Trigger View)242
- Display Snmp Mib Event243
- Display Snmp Mib Event Event244
- Display Snmp Mib Event Object List246
- Display Snmp Mib Event Summary247
- Display Snmp Mib Event Trigger248
- Event Enable251
- Event Owner (Trigger-Boolean View)252
- Event Owner (Trigger-Existence View)252
- Falling253
- Frequency254
- Object List Owner (Action-Notification View)255
- Object List Owner (Trigger-Boolean View)255
- Object List Owner (Trigger-Existence View)256
- Object List Owner (Trigger-Threshold View)257
- Object List Owner (Trigger View)258
- Oid (Action-Notification View)259
- Oid (Action-Set View)259
- Oid (Trigger View)260
- Rising261
- Sample262
- Snmp Mib Event Owner262
- Snmp Mib Event Object List263
- Snmp Mib Event Sample Instance Maximum264
- Snmp Mib Event Sample Minimum265
- Snmp Mib Event Trigger266
- Snmp-Agent Trap Enable Event-Mib266
- Startup (Trigger-Existence View)267
- Startup (Trigger-Threshold View)268
- Startup Enable269
- Test269
- Trigger Enable270
- Type271
- Value (Action-Set View)272
- Value (Trigger-Boolean View)272
- Wildcard Context (Action-Set View)273
- Wildcard Context (Trigger View)274
- Wildcard Oid (Action-Set View)274
- Wildcard Oid (Trigger View)275
NETCONF Commands277
- Netconf Soap Http Enable277
- Netconf Soap Https Enable277
- Netconf Ssh Server Enable278
- Netconf Ssh Server Port279
- Xml279
CWMP Commands281
- Cwmp281
- Cwmp Acs Default Password281
- Cwmp Acs Default Url282
- Cwmp Acs Default Username283
- Cwmp Acs Password283
- Cwmp Acs Url284
- Cwmp Acs Username285
- Cwmp Cpe Connect Interface286
- Cwmp Cpe Connect Retry287
- Cwmp Cpe Inform Interval287
- Cwmp Cpe Inform Interval Enable288
- Cwmp Cpe Inform Time289
- Cwmp Cpe Password289
- Cwmp Cpe Provision-Code290
- Cwmp Cpe Stun Enable291
- Cwmp Cpe Username292
- Cwmp Cpe Wait Timeout292
- Cwmp Enable293
- Display Cwmp Configuration294
- Display Cwmp Status295
- Ssl Client-Policy296
EAA Commands298
- Action Cli298
- Action Reboot299
- Action Switchover301
- Action Syslog301
- Commit302
- Display Rtm Environment303
- Display Rtm Policy303
- Event Cli305
- Event Hotplug306
- Event Interface307
- Event Process309
- Event Snmp Oid311
- Event Snmp-Notification312
- Event Syslog313
- Rtm Cli-Policy314
- Rtm Environment315
- Rtm Scheduler Suspend316
- Rtm Tcl-Policy317
- Running-Time318
- User-Role318
Process Monitoring and Maintenance Commands320
- Display Exception Context320
- Display Exception Filepath325
- Display Kernel Deadloop326
- Display Kernel Deadloop Configuration330
- Display Kernel Exception331
- Display Process334
- Display Process Cpu337
- Display Process Log339
- Display Process Memory340
- Display Process Memory Heap342
- Display Process Memory Heap Address343
- Display Process Memory Heap Size345
- Exception Filepath346
- Monitor Kernel Deadloop Enable347
- Monitor Kernel Deadloop Exclude-Thread348
- Monitor Kernel Deadloop Time349
- Monitor Process350
- Monitor Thread356
- Process Core359
- Reset Exception Context360
- Reset Kernel Deadloop361
- Reset Kernel Exception362
Sampler Configuration Commands364
- Display Sampler364
- Sampler365
Port Mirroring Commands367
- Display Mirroring-Group367
- Mirroring-Group368
- Mirroring-Group Mirroring-Port (Interface View)368
- Mirroring-Group Mirroring-Port (System View)369
- Mirroring-Group Monitor-Port (Interface View)370
- Mirroring-Group Monitor-Port (System View)371
Flow Mirroring Commands372
- Mirror-To372
Netstream Configuration Commands373
- Display Ip Netstream Cache373
- Display Ip Netstream Export379
- Display Ip Netstream Template380
- Enable383
- Ip Netstream384
- Ip Netstream { Inbound | Outbound } Filter384
- Ip Netstream { Inbound | Outbound } Sampler385
- Ip Netstream Aggregation386
- Ip Netstream Export Host387
- Ip Netstream Export Rate389
- Ip Netstream Export Source389
- Ip Netstream Export V9-Template Refresh-Rate Packet390
- Ip Netstream Export V9-Template Refresh-Rate Time391
- Ip Netstream Export Version392
- Ip Netstream Max-Entry393
- Ip Netstream Mpls393
- Ip Netstream Timeout Active394
- Ip Netstream Timeout Inactive395
- Reset Ip Netstream Statistics395
Ipv6 Netstream Commands397
- Display Ipv6 Netstream Cache397
- Display Ipv6 Netstream Export402
- Display Ipv6 Netstream Template403
- Enable407
- Ipv6 Netstream408
- Ipv6 Netstream { Inbound | Outbound } Filter408
- Ipv6 Netstream { Inbound | Outbound } Sampler409
- Ipv6 Netstream Aggregation410
- Ipv6 Netstream Export Host411
- Ipv6 Netstream Export Rate412
- Ipv6 Netstream Export Source413
- Ipv6 Netstream Export V9-Template Refresh-Rate Packet414
- Ipv6 Netstream Export V9-Template Refresh-Rate Time414
- Ipv6 Netstream Export Version 9415
- Ipv6 Netstream Max-Entry416
- Ipv6 Netstream Timeout Active417
- Ipv6 Netstream Timeout Inactive417
- Reset Ipv6 Netstream Statistics418
Sflow Commands419
- Display Sflow419
- Sflow Agent420
- Sflow Collector421
- Sflow Counter Interval422
- Sflow Counter Collector422
- Sflow Flow Collector423
- Sflow Flow Max-Header424
- Sflow Sampling-Mode424
- Sflow Sampling-Rate425
- Sflow Source426
Information Center Commands427
- Diagnostic-Logfile Save427
- Display Diagnostic-Logfile Summary427
- Display Info-Center428
- Display Logbuffer429
- Display Logbuffer Summary431
- Display Logfile Summary433
- Display Security-Logfile Summary434
- Enable Log Updown434
- Info-Center Diagnostic-Logfile Enable435
- Info-Center Diagnostic-Logfile Frequency436
- Info-Center Diagnostic-Logfile Quota436
- Info-Center Diagnostic-Logfile Directory437
- Info-Center Logfile Overwrite-Protection438
- Info-Center Enable438
- Info-Center Format439
- Info-Center Logbuffer439
- Info-Center Logbuffer Size440
- Info-Center Logfile Enable441
- Info-Center Logfile Frequency441
- Info-Center Logfile Size-Quota442
- Info-Center Logfile Directory442
- Info-Center Logging Suppress Duplicates443
- Info-Center Loghost445
- Info-Center Loghost Source446
- Info-Center Security-Logfile Alarm-Threshold446
- Info-Center Security-Logfile Enable447
- Info-Center Security-Logfile Frequency448
- Info-Center Security-Logfile Size-Quota448
- Info-Center Security-Logfile Directory449
- Info-Center Source450
- Info-Center Synchronous451
- Info-Center Timestamp452
- Info-Center Timestamp Loghost453
- Info-Center Trace-Logfile Quota454
- Logfile Save454
- Reset Logbuffer455
- Security-Logfile Save455
- Terminal Debugging456
- Terminal Logging Level457
- Terminal Monitor458
Packet Capture Commands459
- Packet-Capture Interface459
- Packet-Capture Read461
Support and Other Resources463
- Contacting HP463
  - Subscription Service463
- Related Information463
  - Documents463
  - Websites463
- Conventions464
Index466

Brand	HP
Model	MSR1003-8S
Category	Network Router
Language	English

HP MSR1003-8S User Manual

Table of Contents

Other manuals for HP MSR1003-8S

Questions and Answers:

HP MSR1003-8S Specifications

Related product manuals