HP MSR1003-8S

286
Use undo ssl client-policy to remove the specified SSL client policy.
Syntax
ssl client-policy policy-name
undo ssl client-policy
Default
No SSL client policy is specified for CWMP.
Views
CWMP view
Predefined user roles
network-admin
Parameters
policy-name: Specifies the name of an SSL client policy, a string of 1 to 31 characters.
Usage guidelines
CWMP uses HTTP or HTTPS for data transmission. If the ACS uses HTTPS for secure access, its URL
begins with https://. You must configure an SSL client policy for the CPE to authenticate the ACS for
establishing an HTTPS connection. For more information about configuring SSL client policies, see
Security Configuration Guide.
Examples
# Specify the SSL client policy test for CWMP.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] ssl client-policy test