HP P2000 G3 Reference Guide

HP StorageWorks P2000 G3 MSA System SMU Reference Guide 127
External details for certain FA MIB 2.2 objects
Tables in this section specify values for certain objects described in Table 11.
External details for connUnitRevsTable
trapRegRowState Specifies the state of the row READ: rowActive(3) if traps are
enabled through Telnet; otherwise
rowInactive(2)
WRITE: Not supported
Enterprise-specific fields Includes the following objects
cpqSiSysSerialNum System serial number For example, 3CL8Y40991
cpqSiSysProductId System product ID For example, 481321-001
cpqSiProductName System product name For example, HP StorageWorks
P2000 G3
cpqHoMibStatusArray An array of MIB status structures.
Octets 0–3 in block 0 are reserved
for systems management and serve
as an aggregate of the other MIBs.
Octet 0: 0.
Octet 1 (overall status):
0 = Not available;
1 = Unknown/other;
2 = OK/normal;
3 = Degraded/warning;
4 = Failed/critical
Octet 2 (system flags):
9 = device is not a server and
web-based management is enabled
Octet 3 (device type):
14 = e n c l o s u re
For example, 00.02.09.14 (hex)
cpqHoGUID Globally unique identifier formed
from the product ID and serial
number
For example, 4813213CL8Y40991
Table 11 FA MIB 2.2 objects, descriptions, and values (continued)
Object Description Value
Table 12 connUnitRevsTable index and description values
connUnitRevsIndex connUnitRevsDescription
1 Firmware revision for Storage Controller (Controller A)
2 Firmware revision for Storage Controller (Controller B)
3 Firmware revision for Memory Controller (Controller A)
4 Firmware revision for Memory Controller (Controller B)
5 Firmware revision for Storage Controller loader (Controller A)
6 Firmware revision for Storage Controller loader (Controller B)
7 Firmware revision for Management Controller (Controller A)
8 Firmware revision for Management Controller (Controller B)
9 Firmware revision for MC loader (Controller A)
10 Firmware revision for MC loader (Controller B)
11 Firmware Revision for Unified CPLD (Controller A)

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures